Searching for a reliable concrete flooring contractor for your Nottingham project? Technic Floors delivers commercial and industrial concrete slabs across the city and the wider East Midlands, from distribution units at Colwick and Eldon Road to manufacturing plants in Beeston and trade premises along the M1 corridor.
Â
We work closely with main contractors, developers and structural engineers from the earliest specifications through to slab handover, ensuring that the design, pour programme and quality records remain fully aligned with the rest of the build.
Get In Touch.
Industrial floors throughout Nottingham are required to support demanding working loads, from high-bay racking within Queens Drive warehouses to heavy plant in Blenheim manufacturing units and continuous HGV movement across Colwick yards. A slab that has not been correctly specified can prove costly to operate and considerably more expensive to repair. Our work covers warehouses, factories, logistics centres, retail units and car parks across new build, fit-out and replacement schemes, with every slab engineered to the loads it will carry.
Â
Internal floors and external hardstandings are installed by the same team under a single programme, ensuring that joints, levels and falls align precisely where the building meets the yard. You are welcome to explore our full range of concrete flooring solutions.
Our Concrete Flooring Services In Nottingham .
We provide the complete slab package on Nottingham projects, rather than simply supplying a finishing team on the day of the pour. Setting out, reinforcement, finishing, joint cutting and compliance testing are all managed in-house, which provides the trades that follow with a dependable slab to build upon.
Concrete Laser Screed
For wide-area pours where surface regularity is essential, concrete laser screed achieves levels of flatness and accuracy that hand finishing cannot match. Laser-guided grade control maintains consistent tolerances across the entire slab, which is particularly important for distribution centres operating narrow-aisle racking, materials handling equipment or automated picking systems. The finished floor achieves the specified SR class without compromising the build programme.
Concrete Saw Cutting
Concrete shrinks as it cures, and without engineered relief points this movement can result in random cracking. Saw-cut induced joints provide the slab with a controlled line along which to crack. Cutting too early disturbs the aggregate, while cutting too late allows movement to occur first. Our teams work within the correct curing window, ensuring that joints are positioned exactly as specified by the engineer.
Concrete Cube Testing
Cube testing verifies the compressive strength of the concrete actually placed, rather than relying solely on the figure stated on the delivery ticket. Samples are taken at the pour, cured under controlled conditions and tested to BS EN 12390 at 7 and 28 days. The results are retained within the project records as evidence that the slab meets specification.
Concrete Steel Fixing
Reinforcement provides a slab with its tensile strength, and the manner in which it is tied directly affects how the floor performs under point loads. Our steel fixing teams work directly from the structural drawings, with bar sizes, lap lengths, cover and chair spacing all confirmed before any concrete is placed. On floors supporting heavy racking, plant or HGV traffic, this attention to detail determines whether a slab performs over the long term or fails prematurely.
Decking & Structural Concrete Floors​
On multi-storey schemes, the slab forms an integral part of the building structure rather than simply a surface. Decking work requires close coordination with the steel frame contractor and the pour sequence. We deliver suspended slabs that are ready to receive follow-on trades without becoming a bottleneck on the critical path.
Technic Floors provides concrete flooring for both internal and external environments, with each solution designed around the specific conditions in which it will operate.
Within warehouses, manufacturing plants and distribution centres, floors are subject to constant demands from forklifts, pallet trucks and stored loads. Our internal concrete flooring is designed to perform reliably with minimal maintenance, with thickness, mesh layout and surface finish specified for the intended use. Where required, dry-shake hardeners or anti-static treatments are applied prior to final power-floating.
Yards, hardstandings and HGV turning areas face a different set of demands, including freeze-thaw cycles, standing water, oil contamination and repeated axle loading. Our external concrete flooring incorporates air-entrained mixes, increased cover to the reinforcement and falls designed to drain effectively, ensuring that the slab withstands the East Midlands climate and supports continued operations.
Main contractors across Nottingham return to Technic Floors because a well-delivered slab is one less element of the project to manage.
Our focus on commercial concrete flooring ensures that every floor is delivered with performance and longevity in mind.
Our Concrete Flooring Projects Across Nottingham & The East Midlands .
Our portfolio across the East Midlands and the wider UK encompasses distribution parks, manufacturing plants, food production facilities and large-format retail developments. A selection of completed work can be viewed on our projects page, with installation imagery available in the gallery.
A meaningful price per square metre cannot be provided without the slab specification, as area, depth, reinforcement design, surface tolerance, access and the existing sub-base all influence the cost. Please send the drawings or a brief outline through our contact page and we will return a fully costed proposal.
Yes. We work throughout Nottingham and across the wider region, including Derby, Leicester, Mansfield and Newark, covering warehouses, manufacturing facilities, retail developments, logistics units, car parks and external hardstandings.
Most industrial slabs are power-floated or laser-screeded over reinforcement. The most suitable finish depends on the specified SR class, the activity taking place on the floor, and whether dry-shake hardeners or anti-static treatments form part of the specification.
Call 01942 679100 to speak with our estimating team, email info@technicfloors.co.uk with your drawings, or use the form on our contact page.
areas covered.
Our projects have taken us all over the UK.
Get In Touch.
Do you have a Nottingham project on the programme? The earlier we are able to review your drawings, the more effectively we can refine the specification, pricing and pour dates around the wider build.
Call 01942 679100 to speak with a specialist, email info@technicfloors.co.uk, or request a quote online.